Stone patio tiles12/25/2023 ![]() ![]() To adjust a stone for flush and pitch, pry it up with a square shovel, then use a trowel to add or remove wet mix.The stone face should be as close to the string as possible without actually touching it. With a level, check the edges of the stone to make sure they are flush with any adjacent slabs, and check the strings to make sure the stone is pitching at the correct angle.Tip : Safely “walk” heavy stones into place by holding an edge on the ground and shifting the weight from one corner to the other. Then tap the slab around the edges and in the center with a rubber mallet to set it firmly into place.Twist the stone slightly to put it firmly in contact with the bed.You’ll need two people to handle stones weighing 100 pounds or more. Lower the stone, smooth face up, into the setting bed. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |